10 Reasons Why Your Ryobi Pressure Washer Soap is Not Working

Why does a Ryobi pressure washer soap not working properly? It can be because of an improper nozzle, bad soap injector components, high water pressure, etc. Well, these are the most common problems we have seen.

Nowadays, Ryobi pressure washer users are complaining more about their soap dispensers. If you are also a user of this pressure washer, then you have come to the right place. Here, we will discuss all the probable problems, reasons, and solutions for the Ryobi pressure washer soap issue.

To know more about the concept, keep reading.

Ryobi Pressure Washer Soap Not Working: What Are The Reasons?

Have you ever transpired that your Ryobi pressure washer is not having proper suction and mixing? It’s because the soap dispenser is not working properly.

Besides, the tube and hose create some kinks that hinder the flow of the detergent solution. Some common reasons can be if your washer has a bad sprayer nozzle, or if its soap injector components are faulty. Again, when the water supply is inadequate, that can also prevent soap dispensers from working.

These were all just the teasers. There are a lot more reasons to know-

Reasons for Ryobi Pressure Washer Soap Does Not Work	Possible Solutions to Try
Bad sprayer nozzle	Get the correct nozzle size.
Faulty soap injector components	Purchase a new chemical injection kit matched with the model number.
Improper water supply	Make sure the water source is fully turned on.
Pump filled with air	Make the hose airtight.
Clogged intake filter	Take out the filter and wash it.
The detergent bottle is not connected properly.	Install the detergent bottle and suction tube properly.
High water pressure	Attach the soap injector in the correct position.
Bad metal ball	Apply lubricant to your soap injector components.
Broken siphon tube	Clean the dirt remaining in the siphon tube.
Thick detergent	Add more water with the detergent.

Bad Sprayer Nozzle

Sometimes, the sprayer nozzle in the hole seems to be too small to draw the soap correctly. At that time, you can refer to the owner’s manual, and get the correct size of nozzle for your application.

Or, you can replace the nozzle if needed. Before replacing the pressure washer’s spray nozzle, check its size first.

Don’t worry if it is black and 65 degrees because all nozzles are the same. You just need to quit your high-pressure spray nozzle and go for a low-angled one. Or if your nozzle is adjustable itself, you can also turn it to the widest.

Another reason can be a worn-out nozzle that gathers dirt again and again. It would be better if you replace the entire nozzle at that time.

Soap Injector Components Are Faulty

The injector piston, O-rings, or springs can be defective sometimes. You just need to purchase a new chemical injection kit that contains all the components to repair the injector system.

Ensure you enter the exact model number to get compatible Ryobi pressure washer accessories to find the correct injection kit.

Blockages in the valve areas can disrupt the flow of the soap injector. Moreover, dirt and debris can make a home if you use your washer regularly. You must clean the existing dirt and use a filter to stop the further blockages

Suppose, you have tried all the steps above, yet your soap dispenser is not working. At that time, your last option would be to inspect the soap injector kit. There, you will get all the parts that are used to make soap with high-pressure water. This water then goes to the spray nozzle.

Well, a soap dispenser relies on some essential components like- an injector, metal ball, conical spring, and O-ring. Check if any of these components are faulty or not.

If you see, the chemical injection kit is found beside the pressure pump. Just take a wrench, lose its screws and take it out from the pressure washer. If any of the components own out, replace them immediately. In many cases, it solves the entire issue at once suggested by Repairclinic, too.

Improper Water Supply

Water supply can get restricted in your pressure washer. This can be a reason for the washer not to dispense soap properly.

Another reason can be when the water source is not fully turned on. So, you better check that as well.

Pump Filled With Air

When the fittings and the hose are not tight the washer pump tends to get filled with air.

Ensure the hose is airtight and squeeze the trigger for smooth flow.

The intake Filter Is Clogged

Water can’t pass easily when the intake filter gets clogged. Perhaps, this is the reason for the Ryobi pressure washer soap not coming out. Just take the filter out and check if any dirt or debris is there.

Also, do not forget to clean the washer detergent tank after each use. Because, when we mix detergent or soap with water it becomes thicker than regular soap, and when we put them idle for a long time, they get dry. Those dry particles can hinder the flow of soap solutions.

The Detergent Bottle Was Not Connected Properly

It is obvious that if you don’t connect the detergent bottle and suction tube properly the soap won’t be dispensed to the hose. And that can make your Ryobi 2000 psi pressure washer soap dispenser not working.

Make sure you have installed the detergent bottle and suction tube accurately.

High Water Pressure

When the water pressure in a pressure washer is high, the detergent fails to get into the hose. If you attach the soap injector in the correct position, this problem won’t arise so easily.

Bad Metal Ball

All injector kits have metal balls. This substance usually gets stuck when the soap injector kit is not properly maintained. As a result, the soap in the pressure washer can’t reach the hose. Applying some lubricant to the soap injector components can solve the problem.

You can check if the kit is working fine by installing the O-ring and putting the ball inside. If you shake the kit and balls come out, it’s a good sign. Your soap injector kit is working fine.

The best thing would be to use less amount of lubricant.

Then install all the components back to their position and attach the kit to your pressure washer.

Broken Siphon Tube

A broken siphon tube does not let the sprayer mix with detergent. Besides, it restricts the flow of detergent as well. It would be better if you give a prior check to the pressure washer’s siphon tube.

As we know, the siphon tube is a path for water and soap to go toward the end of the nozzle. Unless you use the correct size siphon tube, water can’t pass properly.

So, check the tube, if there is any dirt or not, and clean the two ends with pure water.

This May Help Clean the Soap Siphon!

Thick Detergent

If the amount of detergent is high or the detergent is too thick, it won’t mix with water gently. And thus, the soap dispenser can’t dispense any soap. Just add more water into the detergent tank and you are done.

Compared to regular soaps, detergent solutions are much thicker. Never make the mistake of mixing soap and water in the dispenser tank.

You just need to dilute the soap solution in the detergent tank with the right amount of water, i.e. 80% water, and 20% soap. However, putting more detergent can create a blockage due to thickness.

Frequently Asked Questions (FAQs)

Conclusion

Hopefully, the above concept could give you an oriented view of the Ryobi pressure washer. If you still think that your Ryobi pressure washer soap not working, give a check on its nozzle first. An improper nozzle or bad soap injector components are the most common reasons for the failure of a soap dispenser.

Since we have described all the probable problems and causes for a bad Ryobi pressure washer soap, you can easily identify the symptoms. And lastly, the solutions are out there to make your pressure washer the best.

Let us know if you have any further queries through the comment section. Thank you.

You Can Also Read:

• The Only Ryobi Pressure Washer Hose Replacement Guide You’ll Need
• Pressure Washer Tips Chart: A Complete Guide To Choosing The Right One
• Pressure Washer Hose Size Chart – All Sizes Explained in Detail
• 4 Pressure Washing Vinyl Siding Problems You Should Be Aware Of