How To Attach a Foam Cannon To Sun Joe Pressure Washer the Easy Way
Sun Joe Pressure washers have a variety of uses, and they come with different nozzles and attachments suited for different works. Foam cannon is an important attachment that can make your car cleaning more effective.
You can attach a foam cannon to the Sun Joe Pressure washer in a similar way as you would do it with any other washer. A foam cannon creates thick foam by mixing just the right combination of water, air, and car wash detergent.
So if you want to attach foam cannon to a sun joe pressure washer, our guide is here to help you in the easiest ways possible.
Can you attach a foam cannon to the Sun Joe Pressure washer
You can attach a foam cannon to a Sun Joe Pressure washer. This is a fantastic technique to boost your pressure washer’s washing ability and speed up and simplify washing.
Assuming the pressure washer wand has a 1/4-inch female quick-connect connection, the 1/4-inch male quick-connect fitting on the end of the foam cannon will easily attach to the base of most pressure washer wands.
How to Attach Foam Cannon To Sun Joe Pressure washer
There are many different models of foam cannons available in the market, but you will need to ensure that they are of the correct fitting according to the size of your pressure washer wand.
The best foam cannon to be used with a Sun Joe Pressure washer is the Sun Joe SPX-FC34. But you can fit almost any foam cannon with this pressure washer.
If the pressure washer wand is bigger or smaller than ¼ inch, then you can find a transfer adapter for the proper fit. Read below to learn how to properly attach the foam cannon to your washer.
Step 1: Fill the reservoir
Before attaching the foam cannon to your pressure washer, you must fill it with soap and water. There is a prescribed ratio of soap to water in each foam cannon. For best results, make certain to stick to the instructions provided with your specific kind of foam cannon.
Step 2: Connect the foam cannon
The foam cannon should first be connected to the pressure washer wand. Connecting the foam cannon’s female quick connect fitting to the wand’s end is necessary. To ensure there are no leaks, thoroughly tighten the connection.
Sometimes, the wand’s end or the foam cannon’s female connection can be smaller or bigger, and they might not fit together properly. If this is the case, you will need to buy an adapter that will secure the connection properly.
Step 3: Test fire
Once you have securely connected the foam cannon to your Sun Joe Pressure washer, test fire to see if everything is perfect. Start your pressure washer, then squeeze the trigger of the foam gun to test it. You should see the cannon ejecting a substantial amount of foam.
Why should you use a Foam Cannon with a Sun Joe Pressure washer
Sun Joe pressure washers are really powerful and heavy-duty washers, and thus, you might wonder why you should use a foam cannon with it. There are many different reasons for using it, which we will discuss below.
- Increases the cleaning effectiveness by several times
- If your pressure washer doesn’t have an internal detergent mixing system, foam cannon will take care of that.
- You can clean your car perfectly with the help of a foam cannon.
- Since you can quickly adjust the wand on a foam cannon, you can decide whether or not to use detergent, eliminating the need for hand detergent spray.
Things to consider when attaching Foam Cannon to Sun Joe Pressure Washer
When you are attaching a foam cannon to your Sun Joe pressure washer, the tips below will help you attach and use the foam perfectly with your pressure washer.
Check all the fittings
Properly check all the fittings of both your washer and the foam cannon you are buying. The connections must be compatible with each other. If they are not compatible, they won’t be secure, and you can notice leakages around the cannon.
Select the correct soap
Not all soap operas are made equally. You should select a soap that is made especially for pressure washer usage. Since these soaps are often more concentrated than conventional home cleansers, they will be better able to remove filth and grease.
Get rid of air
Before beginning the cleaning process with the foam cannon and pressure washer, you must get rid of the air. To confirm if the air is gone, spray water through the cannon while not putting on the pressure washer.
Frequently Asked Questions (FAQs)
Even if you are using a weaker pressure washer, the foam cannon will still function. But you should expect a runnier foam. It is recommended that the pressure washer should have a minimum output of 1100 PSI and 1.5 GPM to function properly.
Your foam cannon may not function properly for a variety of reasons, but the most common one is that you neglected to rinse the nozzle after each usage. This easy after-use procedure may and will guarantee that your foam cannon continues to blast out heavy foam for a long time.
The foam cannon will require the addition of soap and warm water. Your chosen foam cannon’s brand and type will determine the precise mixing ratio. Your Foam Cannon reservoir should typically contain 3 to 4 ounces of foam soap, and the remaining container should be filled with warm water. Shake the water and soap together thoroughly before using.
Conclusion
Attaching a foam cannon with a Sun Joe Pressure washer is not that difficult; all you need to do is check the fittings properly. Always make sure that you buy a foam cannon that is compatible with your pressure washer model.
We believe by now you already know to attach a foam cannon to the Sun Joe pressure washer easily. Follow our guide and extra tips, which we have discussed, to make the process hassle-free.
Also, before turning on the pressure washer, double check all the connections are secured to prevent any leakages. Moreover, always clean your foam cannon after using it to increase its longevity.
You Can Also Read:
