The Most Recommended Ryobi Pressure Washer Hose Size You Must Know!
What is the recommended size for the Ryobi pressure washer hose? Well, Ryobi recommended the 35 ft or 25 ft size of replacement hose. But what about the hose diameter?
That’s very debatable to say. Because some of us prefer hoses that provide high volume, and some of us want water flow that’s not too much either. However, it’s better to opt for the correct size according to our applications or where we are going to use it.
Don’t get confused. In this article, we have covered all the Ryobi pressure washer hose size charts with their length, diameter in inches, and mm.
For example- you have a 3200 PSI Ryobi pressure washer which has a recommended hose size of ¼” but you have used the 5/16” mistakenly. By reading this article, you can get yourself saved from such mistakes.
What Size Garden Hose For Ryobi Pressure Washer
Almost all series of Ryobi pressure washers use ¼” hose. But the length of the hose can differ. It can be 25 feet, 35 feet, 50 feet, etc, based on the pressure ratings.
If you see, the ¼” hose is the smallest size. This is the recommended size for all Ryobi gas pressure washers that can withstand up to 3200 PSI. Although the ¾” hose is recommended for a high volume of water, that would have less application. Most of our applications require a controllable water flow, which can be possible from a ¼” hose.
Recommended Hose Size For Different Series Of Ryobi Pressure Washers
The recommended hose size you can use for your Ryobi RY802900 pressure washer is 35 ft.
On the other hand, the Ryobi 2000 PSI Electric Pressure Washer goes well with a hose of 25 ft. The Ryobi electric pressure washer hose fitting size of the 2300 PSI has the same length, i.e. ¼ inch × 25 ft.
In the same way, the Ryobi 3300 PSI Gas Pressure Washer uses a replacement hose of 35 ft. L. Its total measurement is 1.4 in. × 35 ft.
Ryobi 1800 PSI Electric Pressure Washer uses a bit smaller hose. Its hose size is 20 feet and its diameter is ¼ inch.
The Ryobi pressure washer hose fitting size of 1500 PSI is 30 feet. Whereas, the Ryobi electric pressure washer hose size of 3000 PSI is 35 feet.
In terms of the Ryobi 2700 PSI Electric Pressure Washer, the hose size can vary. It can sometimes be 25 ft and sometimes 35 ft. You can use the preferred size based on the water pressure.
The 3100 PSI in a Ryobi pressure washer requires a hose of 35 feet, the 3200 PSI requires a hose with a length of 50 ft and ¼ diameter. Similarly, the 3400 PSI Ryobi pressure washer uses a 50 ft long hose with a 5/16” inch diameter.
| Ryobi Pressure Washer Series | Hose Length | Hose Diameter |
| Ryobi RY802900 Pressure Washer | 35 ft | ¼ inch and 6.4 mm |
| Ryobi 2000 PSI Electric Pressure Washer | 25 ft | ¼ inch and 6.4 mm |
| Ryobi 2300 PSI Electric Pressure Washer | 25 ft | ¼ inch and 6.4 mm |
| Ryobi 3300 PSI Gas Pressure Washer | 35 ft | 5/16 inch and 7.9 mm |
| Ryobi 1800 PSI Electric Pressure Washer | 20 ft | ¼ inch and 6.4 mm |
| Ryobi 3000 PSI Electric Pressure Washer | 35 ft | ¼ inch and 6.4 mm |
| Ryobi 2700 PSI Electric Pressure Washer | 35 ft | ¼ inch and 6.4 mm |
| Ryobi 3400 PSI pressure washer | 50 ft | 5/16 inch 7.9 mm |
| Ryobi 1500 PSI pressure washer | 30 ft | 1 inch and 25.4 mm |
| Ryobi 3100 PSI pressure washer | 35 ft | ¼ inch and 6.4 mm |
| Ryobi 1900 PSI pressure washer | 25 inches | ¼ inch and 6.4 mm |
| Ryobi 3200 PSI pressure washer | 50 ft | ¼ inch and 6.4 mm |
| Ryobi 1600 PSI pressure washer | 25 ft | 0.25 inch |
It is quite clear that the ¼” × 35 ft is the most common size in the Ryobi pressure washers. We mostly use our pressure washers to clean the driveways and patios. In that case, the best hose you can use is, which has a measurement of ¼” ×35 ft. If your Ryobi pressure washer has a higher rating than 3200 PSI, you can easily hit up for the 5/16” diameter hose. As we have already prescribed the length of the hoses, you can opt for the best one.
We know that the ¼” is the recommended size for most of the Ryobi pressure washers. But do you know that it is most commonly used among users?
Since most of the pressure washer users go for PSI in between 3200, they prefer the ¼” hose. It is in fact suitable for cleaning the home with a good volume of water flow.
Frequently Asked Questions (FAQs)
Whether it is gas power pressure washers or electric power pressure washers, a hose of ¼” diameter is used everywhere. Besides the commercial great pressure washers and the washers used for residential purposes, have ¼” diameter hoses.
The horse that comes on a Ryobi pressure washer is 3.5 ft. L. It’s the perfect length that can give you easy access to all those hard-to-reach places. Also, the M22 coupler will allow you to use two hoses together. This will give you an extended easy reach.
A ¼” hose is considered the small size hose. Also, it is considered the most common size hose used for pressure washers that are small gas-powered or consumer-grade electric. This ¼” hose can withstand up to 3200 PSI. On the other hand, the 5/16” hose is considered a mid-sized hose. They are the least common, used for the prosumer-grade gas pressure washers.
Conclusions
Hopefully, the above article was helpful enough for you. Here, we have covered all the Ryobi pressure washer hose size that can clear the confusion of any user. Well, the most common size of hose we have discovered so far is the ¼”. This hose size is mostly preferred to clean the exterior of the home.
All the gas-powered and consumer-grade electric pressure washers go well with a ¼” size of hose. Conversely, the 5/16” hose is suitable for pressure washers that have a higher rate like more than 3200 PSI. However, this hose size is the least common.
All we would say is, ¼” will go well with almost every pressure washer.
This is all. Thank you.
You Can Also Read:
