Sun Joe Pressure Washer Quick Connect Size: Everything You Need to Know
What’s the recommended Sun Joe pressure washer quick connect size? Snow Joe suggests using an M22-14mm quick connect. This perfectly fits into different types of washers and steadily provides flow along with durability. But don’t run off to set everything up right away. There are a ton of things you need to evaluate and consider before utilizing such parts.
In this article, you will learn all about it. By the end, you will find the ideal quick connect you should opt for. So, check it all out.
Considering Facts to Determine the Sun Joe Pressure Washer Quick Connect Size In No Time
A quick connection may be small in size, but it has several parts that demand close consideration. When choosing the right option, the dimension, type, and thread size matter a lot. A slight incompatibility of even a millimeter can change the whole experience.
Though Sun Joe recommends the M22 connector as mentioned above, how to get the ideal size when choosing other aftermarket connectors? In such a case, the following facts are a must to be considered. Here’s how to pay attention to these crucial points.
Dimension
The dimension is the most important thing to consider in a quick connection for the hose. This is what determines what the experience of using the hose will be like.
The dimension here includes the connector’s length, thickness, and diameter. While the length is not much of a factor, the thickness and diameter both play an important is giving the washer its functionality.
The outer dimension may vary from brand to brand. Still, the inner thread diameter is the key-role playing fact here, where Sun Joe recommends for 14mm thread size female hose connector.
However, the smaller the diameter is, the less amount of squirt it will be able to generate. So, it means the force of the squirt will be greater. In contrast, having a wider quick connection means a larger amount of fluid will pass through but at a comparatively less force.
On this note, you should also know that the thickness affects the dimension. The thicker the connection is, the smaller its hole will be, and vice-versa. However, the thickness means durability as well.
Types
There are different types of quick-connect fittings for you to choose from. While the options for connects are many, the Sun Joe pressure washer hose works fine with 4 of them.
The most common one is brass. The brass quick connect has a low melting point. Why does this matter? A low melting point protects the connector from corrosion caused by hot water. It’s also affordable and very easy to hook up.
Plastic is another every day and way cheaper material in terms of price. However, it isn’t as strong as the other options. Thus, it’s better if you stick to the plastic only if you are using a comparatively weaker pressure washer. Heavy-duty machines won’t be able to match the strength of this material.
Considering everything, rubber is the ideal material for pressure washers’ quick connection. It’s a good material when it comes to preventing leaks. Not only this, rubber is super-flexible and doesn’t wear off easily as metal does. The only downside is rubber can decrease the water pressure. It means you may need to adjust the pressure to a higher point than you need. This is not much of an issue once you get used to it.
For long-time usage, there’s nothing above the stainless steel. It’s reliable thanks to rust-free chromium. It provides proper protection against different chemicals as well. Most importantly, it can withhold the mightiest blow from the pressure washer. But you should know that stainless steel tends to be very expensive. Consider this option only if you have intentions of long-time usage.
Thread Size
The thread sizes usually range from ¹⁄₈”, ¼”, ³⁄₈”, ½”, or ¾”. Although the standard side is ¼ inches, it’s a good idea to get a connector that is 3/8” threaded. These types of connectors are easy to attach, and they stay strongly hooked to the hose.
While 1/4” is ideal for electric connectors and M22 is typically used for spray gun, 3/8” perfectly serves the Sun Joe or any other pressure washer.
These are the basic things you need to consider. It goes without saying that each of these choices solely depends on your requirement. So go through them thoroughly and take your time before coming to a final decision.
How to Install the Quick Connector to The Hose Properly
Knowing about the connector and every other thing is more or less useless unless you have a good idea of how to use them properly. If you are confused about setting up a quick connector, give the following step-by-step guide a read.
Step 1: Start the process by making sure the hose is not connected to an active/running source.
Step 2: Grab the connector you have chosen and screw it to the adapter on your hose. Rotate the connector clockwise to tighten it up.
Step 3: Keep rotating the connector by hand till it doesn’t rotate anymore. Then grab a screwdriver and tighten up the connector with this tool.
Step 4: Keep rotating with the wrench till it’s properly tight.
Step 5: End the process by turning the source on for a bit. See if there is any leakage.
If the connector is loose, tighten it a little more. But if everything is fine, then you are done. Now you can hook it up to your pressure washer and get to work.
Why Choosing the Right Connector Is Crucial for Your Sun Joe Pressure Washer
A leak is unwanted while using a pressure washer. Having a small amount of leak can create a huge mess. When it comes to preventing such mess, quick connectors are more effective than the adapter. In fact, a quick connector plays the most vital role to prevent the leakage of the pressure washer.
This reason is enough to understand the importance of choosing the right hose connector for your Sun Joe pressure washer.
Apart from preventing leakage, quick connectors also contribute to controlling the flow pressure. Simply put, how well your pressure washer will perform depends on the connector you are using.
3 Best Quick Connect for Sun Joe Pressure Washer
Yes, quick connectors are a life-saver and all. But they are not always convenient. If you choose the wrong option, using the Sun Joe pressure washer can turn into a huge hassle. You can easily avoid the complications by simply choosing the best quick connect for the Sun Joe pressure washer. But which one is it?
Check out our top pick for you below.
1. Sun Joe SPX-UQC3K-Budget Friendly Option with Maximum Durability
This one is a $15 option with unbending durability. The convenient connection option and perfect dimensions make it simple and effective to use. Its excellent quality even turns an old pressure washer feels like a new one. It has an adapter as well. It means there’s no chance of spraying even when the fitting is disconnected from the source.
2. Sun Joe SPX-UQC- Universal Quick Connector
If you already own a perfectly fine hose, then SPX-UQC is the best choice for you. Don’t change your hose; instead, for less than $10, get a new connector. It literally fits all the pressure washers in the SPX series. Its robust brass construction promises to serve you for years to come. The smart structure enables this connector to securely attach to the position. It’s an absolute value-for-money item.
3. Twinkle Star 3/8 Inch NPT Quick Connect Adapter Set
As already mentioned, stainless steel is the ultimate material when it comes to durability. If you are looking for such pressure washer that can stay alive through years of pressure washing, then this Twinkle Star’s pressure washer connector is for you. It’s exactly compatible with the M22 thread demanding connection. If long-time usage is your priority, you can get this without a second thought.
You can never go wrong with any of these 3 options. So do check them out and see which one fits your house best.
Frequently Asked Questions (FAQs)
No. Quick connect comes in different sizes. The most common fit is ¼”. But for pressure washers and other powerful machines, 3/8” is a better choice. The commonly used ¼” is utilized for air fitting.
Well, not all of them. Some of the quick-connect fittings are interchangeable. They are known as the universal quick connects. These hose fittings can be swapped around and used for ages. Though their price is a bit on the expensive side, it’s worth the cost.
M22 is the mark of threads. Usually, pressure washer pumps, spray guns, and hoses use M22 threads. The reason behind such a name is the size of the outer diameter, which is 22 mm. In this type of fitting, the inner dimension is 14 mm. It’s an excellent choice thanks to its leak-proof design.
Concluding Words
It’s okay to be confused about the Sun Joe pressure washer quick connect size because it’s a delicate issue. This component comes in different sizes. And some of them may not be appropriate for your machine. This surely creates confusion. But now that you know how the sizes work and what they mean, nothing should confuse you.
Don’t hesitate if you need to give this article another read. Get back to it when you are installing the quick connector to the hose. You will get help with that as well.
You Can Also Read:
